How to configure and verify OSPF

Certification: CCNA Routing and Switching - Cisco Certified Network Associate (CCNA) Routing and Switching

Open Shortest Path First is an interior gateway routing protocol that gathers information and constructs a topology map of a network with a single routing domain such as an Autonomous System. OSPF protocols support both IPv4 and IPv6, featuring both VLSM and CIDR address models. It measures using external metrics associated with each routing interface in order to create its tables using both distance and availability such to find the shortest path to the destination. OSPF also detects any changes in the network, such as new routes or link failures, and updates its topology accordingly using the Dijkstra's algorithm.

While the OSPF does work on its default settings, it is often recommended that you configure it to tweak it to your needs. This article will talk about such configuring and try to touch as many points as possible, but if you are a network technician and want an in-depth explanation you might be better off looking at this CISCO guide.

Things to know beforehand

While OSPF supports both IPv4 and 6, the security aspects on either differ. On IPv4 it can operate securely between routers to authenticate using the built in protection, while on the IPv6 it needs to rely on the IPv6 protection security.

The routes created by the OSPF can be redistributed to any other protocol. It can import routes from intradomain routes such as ABR, ASBR, and can export into IGRP, RIP, IS-IS. For interdomain it can export into both EGP and BGP.

It requires coordination within internal routers, both ABR and ASBR. The minimum default parameters include no authentication and area-assigned interfaces. During configuration, you can specify route distribution, can alter certain interface-specific OSPF parameters as needed, can configure the network either as broadcast or NBMA.

While the OSPF requires a fully meshed network, you can configure it as a point to multipoint network, in case it is not fully meshed. This route may prove more advantageous as it is easier to configure, since you don’t need to configure nearby routers and it consumes only one IP subnet. Also, since it doesn’t require a fully meshed network it is cheaper, and can maintain connectivity in case of FVc fail.

A designated router must be selected (along with an optional backup designated router). A designated router is a router with a non-zero router priority value. Youc an also assign a value to its neighbors, although that is optional.

Using NSSA can simplify network administration for ISPs and can simplify communication with an OSPF protocol. It is also recommended that you configure the sending interface to passive.

The OSPF uses the largest IP address configured on the interface as router ID, and its metric is calculated as ref-bw, by default 108, divided by bandwidth. The OSPF also uses an administrative distance metric counting from 0 to 255, to measure reliability of administrative data. A point with a 255 administrative distance metric is counted and unsecure and is not taken into account at all.

How to configure

To configure it, you must first enable the OSPF. That can be done by the privileged exec mode. (also enter password if prompted). After which you should enter the glob config mode. Then go on and enable the OSPF (# router ospf 109). After that you will be prompted to configure it, after which you should exit the router confi mode.

Next, to configure the interface parameters you need to enter the exec mode, go to configure terminal to enter global configuration, then go to the interface type number command (Router(config)# interface GigabitEthernet 0/0) this will let you configure the type and interface mode. Then you can set the ipospf cost, re-transmit interval, transmit delay, priority, hello/dead-interval, authentification password (for nearby routers). Don’t forget the end command when you are done.

To enable the NSSA, the steps are:enable the exec mode, enter to configure terminal, configrouter ospf process-id;“redistribute protocol [process-id] {level-1 | level-1-2 | level-2} [autonomous-system-number][metric {metric-value | transparent}][metric-type type-value][match {internal | external 1 | external 2}][tag tag-value][route-map map-tag][subnets][nssa-only]” (As said by CISCO);define the interface on which it runs (network ip-address wildcard-mask area area-id);configure a nss area (area-id nssa [no-redistribution][default-information-originate [metric][metric-type]][no-summary][nssa-only]), then you can configure the summary-address prefix mask ([not-advertise][tag tag][nssa-only]), and then don’t forget to exit.

You can also configure an NSSA ABR as a (forced) NSSA LSA Translator. Most steps are the same, except for: configuring a NSSA area border router, (also remember the always keyword to config. the NSSA ABR device as a forced NSSA LSA translator.)(area-idnssa translate type7 always). Also, don’t forget to allow ABR to suppress the forwarding address in translated Type-5 LSA.

You can also disable RFC 3101 Compatibility and Enabling RFC 1587 Compatibility, donfigure OSPF over Different PNs, configure OSPF for Nonbroadcast Networks, configure OSPF Area Parameters, configure OSPF NSSA Parameters (although you may need to view the prerequisites to doing such). There are quite a lot of options when it comes to configuring different aspects of the OSPF, so be sure to check them on the CISCO help-page. In case the explanations in this article seemed a bit blurry, then you will have no problems finding your way around the cisco documentation. You may feel pressured by the big block of text, but fret not. Just keep scrolling until you get to the actual configuration steps.   

There may also be times when you want to verify certain aspects of the configuration. When you need to do that, all you have to remember is the show ipospfandshow ipospf flood-listcommand.Also, remember the use of point-to-multipoint rather than the usual one, and the differences that need to be configured for a network that is not fully meshed.

Related IT Guides

  1. 4 weeks study plan for CCNA Routing and Switching exam
  2. CCNA Routing and Switching scope and sequence
  3. CCNA Routing and Switching: LAN switching and WAN technology
  4. Describe WAN Technologies
  5. Detailed analysis of various sections of CCNA Routing and Switching Exam
  6. How to configure and verify syslog
  7. How to configure PVSTP operation: root bridge elections and spanning tree protocol IP addressing (IPv4 & IPv6)
  8. How to create a static route for CCNA routing and switching
  9. How to install and operate Cisco LAN switches
  10. How to prepare well for CCNA Routing and Switching 200-101
  11. How to Resolve Spanning Tree Operation Issues
  12. How to Troubleshoot and Resolve ACL issues
  13. IP Data Networks: common applications and their impact on the network
  14. Recommended books for CCNA Routing and switching exam
  15. The basics of IPV6 addresses: Global
  16. What are Common Network Problems
  17. What are Network device security features?
  18. What is included in CCNA Routing and Switching Curriculum?
  19. Which abilities CCNA Routing and Switching certification validates?
  20. Why and how passing scores are changed from time to time for CCNA Routing and Switching?

Close 100% Pass Guarantee or Your Money Back

How to Claim the Refund / Exchange?

In case of failure your money is fully secure by BrainDumps Guarantee Policy. Before claiming the guarantee all downloaded products must be deleted and all copies of BrainDumps Products must be destroyed.


Under What Conditions I can Claim the Guarantee?

Full Refund is valid for any BrainDumps Testing Engine Purchase where user fails the corresponding exam within 30 days from the date of purchase of Exam. Product Exchange is valid for customers who claim guarantee within 90 days from date of purchase. Customer can contact BrainDumps to claim this guarantee and get full refund at billing@braindumps.com. Exam failures that occur before the purchasing date are not qualified for claiming guarantee. The refund request should be submitted within 7 days after exam failure.


The money-back-guarantee is not applicable on following cases:

  1. Failure within 7 days after the purchase date. BrainDumps highly recommends the candidates a study time of 7 days to prepare for the exam with BrainDumps study material, any failures cases within 7 days of purchase are rejected because in-sufficient study of BrainDumps materials.
  2. Wrong purchase. BrainDumps will not entertain any claims once the incorrect product is Downloaded and Installed.
  3. Free exam. (No matter failed or wrong choice)
  4. Expired order(s). (Out of 90 days from the purchase date)
  5. Retired exam. (For customers who use our current product to attend the exam which is already retired).
  6. Audio Exams, Hard Copies and Labs Preparations are not covered by Guarantee and no claim can be made against them.
  7. Products that are given for free.
  8. Different names. (Candidate's name is different from payer's name).
  9. The refund option is not valid for Bundles and guarantee can thus not be claimed on Bundle purchases.
  10. Guarantee Policy is not applicable to Admission Tests / Courses, CISSP, EMC, HP, Microsoft, PMI, SAP and SSCP exams as braindumps.com provides only the practice questions for these.
  11. Outdated Exam Products.
Close
Hot Sale! Get 20% Discount for All Exams!

This is a ONE TIME OFFER. You will never see this Again

Instant Discount
Braindumps Testing Engine

20% OFF

Enter Your Email Address to Receive Your 20% OFF Discount Code Plus... Our Exclusive Weekly Deals

A confirmation link will be sent to this email address to verify your login.


* We value your privacy. We will not rent or sell your email address.
Close
Your 20% Discount on Your Purchase

Save 20%. Today on all IT exams. Instant Download

Braindumps Testing Engine

Use the following Discount Code during the checkout and get 20% discount on all your purchases:

Aug18Off20

Start Shopping